|
| As Built |
|---|
| Cylinder Stroke | 30" | Railroad History #147 |
|---|
| Cylinder Diameter | 15 1/2" & 26" | Railroad History #147 |
|---|
| Drivers | 56" | Railroad History #147 |
|---|
| Boiler Pressure | 180 | Railroad History #147 |
|---|
| Weights | 183710 - 31740 | Railroad History #147 |
|---|
| Gauge |
4'8 1/2" Play 3/4" | BLW spec 4215 |
|---|
| Boiler Material |
Steel, 11/16" & 3/4" thick, Bill 3233, "Double the number of rivets where smoke box joins shell of boiler. Rivets in foundation ring 7/8" holes 15/16". All longitud seams butt joints with double covering strips. | BLW spec 4215 |
|---|
| Boiler Diameter |
68", Wagon Top | BLW spec 4215 |
|---|
| Fire Door |
Oval, 16"x20" | BLW spec 4215 |
|---|
| Dome |
31 1/2" on wagon top | BLW spec 4215 |
|---|
| Dome Casing |
Iron, painted, helmet shape | BLW spec 4215 |
|---|
| Jacket Iron |
#76 WG Iron Ptd | BLW spec 4215 |
|---|
| Bands |
Iron, style 9 | BLW spec 4215 |
|---|
| Lagging |
Sectional magnesia | BLW spec 4215 |
|---|
| Firebox length |
120 1/8" | BLW spec 4215 |
|---|
| Firebox width |
42" | BLW spec 4215 |
|---|
| Firebox depth - front |
72 1/4"" | BLW spec 4215 |
|---|
| Firebox depth - back |
69 1/4" | BLW spec 4215 |
|---|
| Stay bolts |
Iron, equal to Low Moor. Stay bolts 1" not over 4" c to c | BLW spec 4215 |
|---|
| Firebox material |
Carnegie Steel | BLW spec 4215 |
|---|
| Firebox Crown |
1/2" | BLW spec 4215 |
|---|
| Firebox Tube |
1/2" | BLW spec 4215 |
|---|
| Firebox Sides |
3/8" | BLW spec 4215 |
|---|
| Firebox Back |
3/8" | BLW spec 4215 |
|---|
| Foundation ring |
4" deep, double riveted | BLW spec 4215 |
|---|
| Crown bars |
"inverted T" 6"x5 1/4" not less than 3" above crown | BLW spec 4215 |
|---|
| Crown bolts |
1" with taper fit thro. crown sheet. Button heads below | BLW spec 4215 |
|---|
| Combustion chamber |
- | BLW spec 4215 |
|---|
| Hollow stays |
- | BLW spec 4215 |
|---|
| Tubes material |
National loco charcoal Iron #11 WG | BLW spec 4215 |
|---|
| Tube ends |
Swaged for cop rings both ends. | BLW spec 4215 |
|---|
| Tubes no. |
321 | BLW spec 4215 |
|---|
| Tube diameter |
2" | BLW spec 4215 |
|---|
| Tube length |
13'6" | BLW spec 4215 |
|---|
| Heating surface - tubes |
2253 sq. ft. | BLW spec 4215 |
|---|
| Heating surface - firebox |
202 sq. ft. | BLW spec 4215 |
|---|
| Heating surface - total |
2455 sq.ft. | BLW spec 4215 |
|---|
| Smoke box extension |
with | BLW spec 4215 |
|---|
| Cleaning hole and cap |
R. & L. | BLW spec 4215 |
|---|
| Spark Ejector |
To deliver R.&L. with smoke box rigging as sent extra for 8/32 D 496 | BLW spec 4215 |
|---|
| Netting and Deflec. Plts. |
With netting 3 1/2 x 3 1/2 mesh | BLW spec 4215 |
|---|
| Boiler working St. Pres. |
180 lbs to be tested to 200 lbs steam pressure, 220 lbs water pressure (240 lbs on second order) | BLW spec 4215 |
|---|
| Smoke box |
Cast iron smoke box front with liner inside for protection of door. Where smoke box extension is riveted to shell the rivets must not be more than 2 1/2" cens to insure air tight joint. | BLW spec 4215 |
|---|
| Safety valves |
2 Richardson encased 3' with relief lever set to 180 lbs | BLW spec 4215 |
|---|
| Gauge cocks |
* 3 Back | BLW spec 4215 |
|---|
| Surface valve |
none | BLW spec 4215 |
|---|
| Water gauge |
* Wis Cen style with lamp | BLW spec 4215 |
|---|
| Blow off cock |
Front | BLW spec 4215 |
|---|
| Dry pipe |
Wrot Iron | BLW spec 4215 |
|---|
| Fire bricks |
on studs | BLW spec 4215 |
|---|
| Cleaning plugs |
Fire box corners back ones diag, sides & back. 3 each side on OS of wagon top a little above crown. 4 in face plate just above crown. 2 in smk box tube sheet clear of Ech(?) to steam pipes. | BLW spec 4215 |
|---|
| Mud drum |
Mud drum with cock & pipe to one side operated from cab. | BLW spec 4215 |
|---|
| Globe valve |
1 1/4" Globe valve in back of dome for siphon cons. terminating in 1 1/4" gas pipe with nipple | BLW spec 4215 |
|---|
| Grate area |
35 sq. ft. | BLW spec 4215 |
|---|
| Grate |
Rocking and drop | BLW spec 4215 |
|---|
| Ash pan, dampers |
Front and back | BLW spec 4215 |
|---|
| Ash pan depth - front |
34" | BLW spec 4215 |
|---|
| Ash pan depth - back |
30" | BLW spec 4215 |
|---|
| Total wheel base of eng. & tend. not to exceed |
52' | BLW spec 4215 |
|---|
| Limit height |
15 ft. | BLW spec 4215 |
|---|
| Limit width |
- | BLW spec 4215 |
|---|
| Wheel base - rigid |
15'1" | BLW spec 4215 |
|---|
| Wheel base - driving |
15'1" | BLW spec 4215 |
|---|
| Wheel base - total |
23'9" | BLW spec 4215 |
|---|
| Weight - on drivers |
about 156000 lbs | BLW spec 4215 |
|---|
| Weight - total |
about 173000 lbs | BLW spec 4215 |
|---|
| Charge as 10.38 E. Weight Photo Sch.2 |
Guaranteed to haul a load of 1150 to 1200 tons of 2000 lb cars & lading on a grade of 1% combined with curves of 4 1/2 degrees. Track and cars being in good condition. | BLW spec 4215 |
|---|
| Whistle |
Chime | BLW spec 4215 |
|---|
| Cylinders |
Back cylinder heads of cast steel | BLW spec 4215 |
|---|
| Cylinders - Diameter |
HP 15 1/2", LP 26" | BLW spec 4215 |
|---|
| Cylinders - Stroke |
30" | BLW spec 4215 |
|---|
| Cylinders - Oilers |
Nathan oval pattern triple S.F.Lub.Cop.pipes ("Ball(?) pipe on second order) | BLW spec 4215 |
|---|
| Steam ports - length |
28 1/2" | BLW spec 4215 |
|---|
| Steam ports - width |
2" | BLW spec 4215 |
|---|
| Steam ports - bridges |
1 3/4";3 1/2";3 1/4" corrected to 3";2 3/4";1 1/2" | BLW spec 4215 |
|---|
| Exhaust ports - length |
28 1/2" | BLW spec 4215 |
|---|
| Exhaust ports - width |
4 1/2" | BLW spec 4215 |
|---|
| Valves - |
| BLW spec 4215 |
|---|
| Valves - |
| BLW spec 4215 |
|---|
| Valves - travel |
5" | BLW spec 4215 |
|---|
| Valves - O.S. Lap |
HP 7/8"; LP 5/8" | BLW spec 4215 |
|---|
| Valves - I.S. Lap |
HP 1/8" neg; LP 1/8" neg | BLW spec 4215 |
|---|
| Valves - Lead |
HP 1/32" ; LP 9/32" | BLW spec 4215 |
|---|
| Eccentric throw |
5" | BLW spec 4215 |
|---|
| Exhaust nozzles |
Double high, Exh pipes to have 8 one inch studs | BLW spec 4215 |
|---|
| Cylinder casings |
Iron, painted | BLW spec 4215 |
|---|
| Cylinder casings - head covers |
Steel, finished | BLW spec 4215 |
|---|
| St. chest casings |
none | BLW spec 4215 |
|---|
| St. chest beads |
none | BLW spec 4215 |
|---|
| St. chest valves |
12" dia piston | BLW spec 4215 |
|---|
| Met Pkg (Piston rods, valve stems) |
U.S. (not spec) valve stems 1 3/4" diam, with strong fillet at neck | BLW spec 4215 |
|---|
| Frame |
Solid, ped cap cast iron, thimble 2" bolt. | BLW spec 4215 |
|---|
| Frame braces |
welded | BLW spec 4215 |
|---|
| Guides |
Steel (brass liners top and bottom on second order) | BLW spec 4215 |
|---|
| Oil cups |
needle | BLW spec 4215 |
|---|
| Cross heads |
Cast steel, tinned bearings | BLW spec 4215 |
|---|
| Rod oil cups |
forged on rods and straps to have plunger (as cos pt.537 on second order) | BLW spec 4215 |
|---|
| Wrist pins |
steel | BLW spec 4215 |
|---|
| Pistons |
rods of iron, cast iron rings sprung into solid head | BLW spec 4215 |
|---|
| Throttle |
balance, brass sleeve on throttle rod | BLW spec 4215 |
|---|
| Throttle position |
Dome | BLW spec 4215 |
|---|
| Eccentric straps |
Ajax, in halves, set screws fitted with jam nuts. | BLW spec 4215 |
|---|
| Side rods |
Solid end, 3 bolts in conn rod straps. Side rods and pins strong. | BLW spec 4215 |
|---|
| Driving springs |
With one extra leaf more than regular | BLW spec 4215 |
|---|
| Drivers - Diameter |
56" | BLW spec 4215 |
|---|
| Drivers - Cen. Diameter |
50" | BLW spec 4215 |
|---|
| Driver Tires - kind |
Midvale, steel, held by shrinkage & shoulder | BLW spec 4215 |
|---|
| Driver Tires - flanged |
front & back, 3" x 5 1/2" | BLW spec 4215 |
|---|
| Driver Tires - plain |
2nd & 3rd, 3" x 6 1/2" | BLW spec 4215 |
|---|
| Drivers |
Ajax liners on hubs of wheels. | BLW spec 4215 |
|---|
| Driving Boxes |
Steeled cast iron card 869 approved | BLW spec 4215 |
|---|
| Journal width |
8 1/2" | BLW spec 4215 |
|---|
| Journal length |
11" | BLW spec 4215 |
|---|
| Spring staples |
Wrot iron | BLW spec 4215 |
|---|
| Pumps |
none | BLW spec 4215 |
|---|
| Injectors |
2 Monitor No 9, L.&R. (Hancock inspirator on second order) | BLW spec 4215 |
|---|
| Pipes, steam |
cop. | BLW spec 4215 |
|---|
| Pipes, check |
cop. | BLW spec 4215 |
|---|
| Pipes, feed |
iron | BLW spec 4215 |
|---|
| Pipes, overflow |
iron | BLW spec 4215 |
|---|
| Injector check |
B.L.W | BLW spec 4215 |
|---|
| Position |
R.&L. | BLW spec 4215 |
|---|
| Steam Heat - couplings |
Sewall | BLW spec 4215 |
|---|
| Steam Heat - Safety Valve |
Any approved | BLW spec 4215 |
|---|
| Steam Heat |
Car hearing apparatus with Ross regulator valve | BLW spec 4215 |
|---|
| Steam gauge |
Star Brass Co. (BLW on second order) | BLW spec 4215 |
|---|
| Water gauge fittings |
Star Brass Co. (BLW on second order) | BLW spec 4215 |
|---|
| Water gauge cocks |
Star Brass Co. (BLW on second order) | BLW spec 4215 |
|---|
| Sand box - Diameter |
31" | BLW spec 4215 |
|---|
| Sand box - Pipes |
Iron | BLW spec 4215 |
|---|
| Sand box - Body |
Iron, painted, helmet shape | BLW spec 4215 |
|---|
| Sand box |
Houston sanding device | BLW spec 4215 |
|---|
| Cab - |
| BLW spec 4215 |
|---|
| Cab - Material |
Ash, steel plates on sides as co's Pt. 420 | BLW spec 4215 |
|---|
| Pilot |
Wood, to stand 3" from rails | BLW spec 4215 |
|---|
| Bumper |
Oak | BLW spec 4215 |
|---|
| Drawhead - center above rail |
32 1/2" corrected to Gould coupler similar to pt. 137 | BLW spec 4215 |
|---|
| Pushing shoes |
with | BLW spec 4215 |
|---|
| Steps |
none | BLW spec 4215 |
|---|
| Bumper plate |
with | BLW spec 4215 |
|---|
| Bumper blocks |
none | BLW spec 4215 |
|---|
| Foot plate |
Securely held to frame as co's print | BLW spec 4215 |
|---|
| Jack Screws |
good and strong, 26" high | BLW spec 4215 |
|---|
| Plates |
BLW property plates on E & T, Pat 28137 | BLW spec 4215 |
|---|
| Truck |
2 wheeled swing bolster, not less than 2 1/4" cradle pins. | BLW spec 4215 |
|---|
| Wheel covers |
none | BLW spec 4215 |
|---|
| Wheels - diam |
30" | BLW spec 4215 |
|---|
| Wheels - tread |
4 1/2" | BLW spec 4215 |
|---|
| Wheels - kind |
Double plate chilled | BLW spec 4215 |
|---|
| Journals - diameter |
6" | BLW spec 4215 |
|---|
| Journals - length |
10" | BLW spec 4215 |
|---|
| Journals |
Ajax brasses with babbit strips & Ajax liners on hubs of wheels. | BLW spec 4215 |
|---|
| Tires |
- | BLW spec 4215 |
|---|
| Tender - Wheels |
8 | BLW spec 4215 |
|---|
| Tender - Frame |
10" Chan (?) Iron, Oak bumpers | BLW spec 4215 |
|---|
| Tender - Drawing no. |
435 | BLW spec 4215 |
|---|
| Tender - Tank |
Sloping back into coal hole, 4500 | BLW spec 4215 |
|---|
| Tender - Gallons, bill |
1504; top & ins 1/4"; OS 3/16"; Bottom 5/16" | BLW spec 4215 |
|---|
| Tender - Trucks |
Archbar, wood bolster, chain bar laid flat | BLW spec 4215 |
|---|
| Tender - Springs |
Elliptic. | BLW spec 4215 |
|---|
| Tender - Wheels - diam |
33" | BLW spec 4215 |
|---|
| Tender - Wheels - tread |
4 1/4" | BLW spec 4215 |
|---|
| Tender - Wheels - Kind |
Chilled | BLW spec 4215 |
|---|
| Tender - Tires |
- | BLW spec 4215 |
|---|
| Tender - Tool boxes |
3; Two at front & one across back, front of water hole. | BLW spec 4215 |
|---|
| Tender - Safety chains |
Single | BLW spec 4215 |
|---|
| Tender - Drawhead - above rail |
33 1/2"; Gould coupler similar to Pt. 96. | BLW spec 4215 |
|---|
| Tender - Brakes |
Both trucks, West'g Auto | BLW spec 4215 |
|---|
| Tender - Bumper blocks |
none | BLW spec 4215 |
|---|
| Tender - Weight with fuel and water |
about 92000 lbs | BLW spec 4215 |
|---|
| Tender |
All rivets to be 1/2" dia & 1 1/2" cens. Angle irons 2 1/2" x 3" x 5/16" or 3/8". Tender to be well braced & stayed. Cross bracing of tender strengthened & friction blocks on front truck. Both trucks to have side bearing. | BLW spec 4215 |
|---|
| Tender - Water hole |
Transverse oval, 17 1/2 x 36" with cover and suitable strainer. Strainer made so that it can be lifted out. | BLW spec 4215 |
|---|
| Lamp brackets |
Both eng. and tender to have signal lamp brackets as required by amer. std. code of rules. | BLW spec 4215 |
|---|
| Running boards |
wood; angle iron nosing | BLW spec 4215 |
|---|
| Lamp shelf |
none | BLW spec 4215 |
|---|
| Headlight step |
on smoke box and on bumper | BLW spec 4215 |
|---|
| Headlight |
A&W No 541 | BLW spec 4215 |
|---|
| Headlight - Reflector to burn |
kerosene | BLW spec 4215 |
|---|
| Headlight - side nos |
none | BLW spec 4215 |
|---|
| Handrail |
Iron | BLW spec 4215 |
|---|
| Handrail - colms |
radial | BLW spec 4215 |
|---|
| Handrail - clock |
none | BLW spec 4215 |
|---|
| Bell - stand |
iron | BLW spec 4215 |
|---|
| Bell |
92 lbs | BLW spec 4215 |
|---|
| Steam gauge - stand |
iron | BLW spec 4215 |
|---|
| Steam gauge |
Brass 7" | BLW spec 4215 |
|---|
| Flag fixtures |
Iron on bumper | BLW spec 4215 |
|---|
| Finish |
D1; Except Steam gauge brass and main rod to be ptd in chan & fin on edge | BLW spec 4215 |
|---|
| Shipment |
by rail | BLW spec 4215 |
|---|
| Junior laws to |
4.20.98 | BLW spec 4215 |
|---|
| Painting - style |
- | BLW spec 4215 |
|---|
| Painting - engine |
black, no striping; Aluminum letters as Co's stencils. Figs on sides of tend spaced 10" & on end 8" or less; figs on sides of cab space 3". | BLW spec 4215 |
|---|
| Painting - tender |
black, no striping | BLW spec 4215 |
|---|
| Painting - interior of cab |
green | BLW spec 4215 |
|---|
| Painting - mark on tank collar |
OTTAWA, ARNPRIOR & PARRY SOUND; placed centrally | BLW spec 4215 |
|---|
| Number |
Cab, front plate, sides of tank, back of tank. | BLW spec 4215 |
|---|
| As CN 1957-1970 classes M-6-b and M-6-a |
|---|
| Cylinder Stroke | 30" | Railroad History #147 |
|---|
| Cylinder Diameter | 22" | Railroad History #147 |
|---|
| Drivers | 56" | Railroad History #147 |
|---|
| Boiler Pressure | 170 | Railroad History #147 |
|---|
| Weights | 188104 - 37467 | Railroad History #147 |
|---|
| Capacity | Estimated to pull 30-35 loaded freight cars. | Fleming: Renfrew Mercury, 1898-04-08. |
|---|