Recent Activity

Fully sprung and equalized trucks

Proto:87 Email List Activity - Tue, 09/16/2008 - 05:39
Regarding the truck issue, has anyone seen the S scale truck by Smokey Mountain Model Works. Says it is fully sprung and equalized. Even has rotating end

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Wed, 09/10/2008 - 17:07
OK, Check the site after the weekend. I'm getting ready to do some more site updates shortly. I'll add what (unofficial) measurements I can. Andy

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Wed, 09/10/2008 - 17:02
... stock ... Andy, Some dimensions would be nice, since they are sorely lacking on either the Kadee or Walther sites. Heck, Kadee doesn't even list them (or

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Wed, 09/10/2008 - 16:26
I think I have just about all the various Kadee HO spring types in stock in the Proto:87 Stores, because I use them myself for other engineering projects. I've

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Wed, 09/10/2008 - 15:42
Those of you looking for a source of tiny, soft springs might do well to check out the different springs that Kadee makes to support their multi scale line of

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Mon, 09/08/2008 - 15:25
... LOL Manfred! The leader (and/or trailer) from the program "How it's made" by either Discovery or National Geographic Channel shows the making of a spring

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Mon, 09/08/2008 - 12:14
... I suggest to add salt to the water as you do with spaghetti. Manfred

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Fri, 09/05/2008 - 19:45
... available - ... He ... Hmmmm. That's an intriguing idea. I'd like to give it a try. Do you have a source; perhaps an old magazine article you could cite?

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Fri, 09/05/2008 - 16:30
... would ... Years ago, Jim Tagney described a spring made from fishing line. He wound it around a screw, dipped it in boiling water and installed.

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Thu, 09/04/2008 - 21:48
... The above seems like a good idea, but I don't know the answer. ... As noted subsequently, San Juan Car Company do indeed have these as part of their 1:48

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Thu, 09/04/2008 - 04:01
I've wondered if this would be possible in HO given that it's been proven workable and effective in O Scale, specifically Proto:48 by San Juan Car Company. If

Re: Question about truck and wheels

Proto:87 Email List Activity - Thu, 09/04/2008 - 03:17
... Michael, Four wheel wagons are a totally different engineering and physics than eight wheeled cars (two four wheeled trucks). Our US styled two trucks

Re: Question about truck and wheels . . and springs

Proto:87 Email List Activity - Thu, 09/04/2008 - 00:38
... *snip* ... *snip* ... Even better: it is possible to mold soft plastic springs which have the appropriate diameter and an appropriate spring rate. It's a

Re: Question about truck and wheels

Proto:87 Email List Activity - Wed, 09/03/2008 - 16:56
... Why? I've built perfectly acceptable sprung 4-wheel wagons in P4 that weigh about 2 to 3 ounces and have a superior ride quality to otherwise similar

Re: Andy Reichert..the star!!

Proto:87 Email List Activity - Tue, 09/02/2008 - 20:57
Brilliant stuff! Especially the Maidstone Corporation trolleybus (I think it's Maidstone). If the destination blind says Loose, then it must be. The

Andy Reichert..the star!!

Proto:87 Email List Activity - Tue, 09/02/2008 - 12:23
Hi All, Not sure if anyone has posted this before, so apologies if someone has. Just came across a link to a new online Modeling magazine, where they have a
Syndicate content